Formed double thickness hardened steel (0.269 in. > heavier than 3 gauge) truss spindle plane and (3) Sentry™ spindles with 8-inch spindle flanges, with 6-bolt pattern and a triple-strength upper deck, over 1/2 inch thick in stress zones for superior strength. Geometrically engineered design with 7 gauge skirts withstands the brunt of commercial mowing.
BLADES (Tempered, alloy steel)
(2) 18 in. (45.7 cm) (1) 15 in. (38.1 cm)
(3) 18 in. (45.7 cm)
(3) 21 in. (53.3 cm)
2.5 cm (approx 1 in.) O.D. shaft. Double bearings. Greasable from top of deck. Spindle cones shield housing and lower bearings from fiber wrap and dirt ingestion.
Belt drive with single Kevlar V-belt and idler arm tensioning.
TRIMABILITY (Outside of std. tire to left trim side)
STARTER & ELECTRICAL SYSTEM
Prevents engine start when PTO clutch is engaged or steering levers are in drive position. Allows operator dismount without engine shutdown only when PTO is disengaged and steering levers are locked in neutral.
ULTIMATE OPERATOR STATION
Iso-mounted, high-back, deep-cushioned, foam-padded, Cordura-covered, padded arms/backrest with lumbar support and coil-spring suspension. Optional Premier suspension seat.
InFrame™ suspension with iso-mounted seat and footrest
Hour meter, parking brake indicator light, ignition switch and push/pull PTO switch. Integrated with throttle lever
TRANSMISSION & STEERING
Design-matched G2 hydrostatic system with auxiliary cooling fans, HydroGear variable displacement piston-type pumps and Parker high-torque wheel motors.